Solar Products Discussion

Modbus register table to Powmr Relab 10kE

Viewing 5 posts – 1 through 5 (of 5 total)
  • Author
    Posts
  • #2188
    sophienko
    Participant

    Hallo.

    I have PowMr Relab 10ke, his connected on the Loger to Site, bat measurement is poor.

    Сan i get a modbus register map to get, for example, the active power of the solar array or the active power on the Gride

     

    • This topic was modified 6 months, 1 week ago by sophienko.
    #2219
    IsabelHe2
    Keymaster

    We’re sorry, but the Modbus protocol is not available for external distribution.

    #2222
    sophienko
    Participant

    Ok,  then RS-485 🙂

    #2232
    IsabelHe2
    Keymaster

    This inverter PowMr Relab 10KE suppport the following RS485 communication protocols:

    • Growatt 485 Communication Protocol V2.01
    • PYLON 485 Communication Protocol V3.5

    Please confirm with your battery supplier that the BMS communication protocol matches one of the options above.

    #2252
    sophienko
    Participant

    Ok.

    Thank you!

Viewing 5 posts – 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.